Skip links

Microclean UHP™

Microclean UHP™

Product Data Sheet:
Our Product Informational and Safety Data Sheets are available for download. If you are interested in purchasing our products feel free to Make A Request or give us a call at +1(800) 800-9019.

Highly effective DI water piping and strong tank cleaner specifically designed to free-floating bacteria and biofilm.

Effectively Removes:


Specifically formulated for complete removal of free-floating and biofilm associated bacteria from DI water loops

More effective than hydrogen peroxide and formaldehyde.

Less corrosive to materials of construction (PVC, stainless steel, ect.)

Liquid formulation for convenience and safety.

Safer to handle than sodium hypochlorite, hydrogen peroxide, ozone, or formaldehyde.

Microclean UHP™ is not intended for cleaning DI resin or reverse osmosis, nanofiltration, and microfiltration membranes.

Aluminum Hydroxide

Dilution Ratio

1% to 3% by volume.


Feed Water pH: 5.1-10.0 Appearance: Colorless liquid. Product pH: 7-8 Specific Gravity: 1.08 +/- 0.04


MC-1 Working Level Test Kit MC-1 is a simple test strip for verifying that the correct dilution of Microclean-UHPTM has been prepared. The test kit may also be used to ensure that the cleaning compound has reached point-of-use areas. Testing is performed immersing approximately 2 inches of the test strip into the cleaning solution for 30 seconds. The color of the test strip is then compared with that of the standard indicator strip. MC-2 Working Level Test Kit The MC-2 low-level test kit is designed to indicate the presence of trace levels of Microclean-UHPTM during the rinse procedure. The simple 3 minute procedure involves a simple titration followed by color comparison. The detection limit of the MC-2 low-level test kit is >1.0 ppm. Used in conjunction with total oxidizable carbon (TOC) resistivity tests, This kit may be used to verify that thorough rinsing of Microclean-UHPTM from the purified water system has been completed.


5 gal (20 kg), 55 gal (220 kg)